Voici le matériel de type "3.1- SWITCH, interrupteurs" actuellement disponible au Téléfab :
-
Blackberry Trackballer Breakout
This is a breakout board for our Blackberry Trackball. The four spindles on the trackball have a tiny circular magnet the end; each of these are paired with an SMD hall effect sensor, which are used to measure up, down, left and right movements of the trackball. An SMD momentary switch is placed under the trackball to give you a select switch. The BTN line will be pulled low when the switch is pressed. Also included on the Trackballer are 4 LEDs: red, blue, green and white. These can be powered to light the clear trackball up any color you can imagine. All features are broken out to a 0.1" pitch header. Regulated, 2.5-5.25VDC power must be provided to power the Hall sensors. The trackball is attached with strong CA glue. Board comes as shown, with all components populated. The hall-effect sensors and trackball combo are surprisingly sensitive. A slight roll of the trackball creates multiple high/low transitions on the four axis pins, easily picked up by any microcontroller essentially giving you the option of adding a mouse to your project. A 360° rotation of the trackball, along a single axis, will result in about 9 high/low transitions.
Emplacement : A3 - Servante "Interrupteur Trackball"
Constructeur : SparkFun
Référence : COM-09320
Plus d'infos : https://www.sparkfun.com/products/9320
Quantité : 1 (disponible : 1)
-
Contact Reed Il10 Watts
Magnetic Switch
Emplacement : Armoire A3, Tiroir "Composants Electroniques"
Référence : 503770 (Conrad)
Plus d'infos : https://www.conrad.fr/ce/fr/product/503770/Contact-Reed-Il10-Watts
Quantité : 30 (disponible : 30)
-
Fin de course
Emplacement : A3 - Tiroir "Composants électroniques"
Référence : Fin de course
Quantité : 5 (disponible : 5)
-
Interrupteur de fin de course
Diverses butées de fin de course Microrupteur 250 V/AC 6 A 1 x On/(On) œillet à souder momentané 1 pc(s) Zippy SM1-N6S-01A0-Z
Emplacement : Armoire A3, Tiroir "Composants Electroniques"
Référence : 1094410 - 62 [Référence: SM1-N6S-01A0-Z; EAN: 2050001928993]
Quantité : 17 (disponible : 16)
-
Joystick
This is a joystick very similar to the ‘analog’ joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers - one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is pressed down.
Emplacement : Armoire A3, Tiroir "Composants Electroniques"
Constructeur : SparkFun
Référence : COM-09032
Plus d'infos : https://www.sparkfun.com/products/9032
Quantité : 2 (disponible : 2)
-
Magnetic Switch -Grove -
This is a Grove interface compatible Magnetic switch module. It is based on encapsulated dry reed switch CT10. CT10 is single-pole, single throw (SPST) type, having normally open ruthenium contacts. The sensor is a double-ended type and may be actuated with an electromagnet, a permanent magnet or a combination of both. The magnetic switch is a wonder tool for designers who would like to turn a circuit on and off based on proximity. Features Grove compatible interface 2.0cm x 2.0cm twig module Minimum external parts 10W rating Rugged encapsulation For all Grove users (especially beginners), we provide you guidance PDF documents.
Emplacement : A3, Servante Interrupteur
Constructeur : SeedStudio
Référence : SKU: COM11335P
Datasheet : Télécharger
Plus d'infos : http://www.seeedstudio.com/depot/Grove-Magnetic-Switch-p-744.html
Quantité : 5 (disponible : 5)
-
Relais: SPDT Relay 30A Grove
The SPDT Relay(30A) is a high quality Single Pole Double Throw Relay(SPDT).The Relay consists of a coil, 1 common terminal, 1 normally closed terminal, and one normally open terminal. When the coil of the relay is at rest (not energized), the common terminal and the normally closed terminal have continuity. When the coil is energized, the common terminal and the normally open terminal have continuity. This relay's coil is rated up to 5V and the contact is rated up to 30A (@250VAC, 30VDC).You can use it to control high current devices.
Emplacement : A3 - Tiroir Composants Electroniques
Constructeur : SeedStudio
Plus d'infos : http://wiki.seeedstudio.com/Grove-SPDT_Relay_30A/
Quantité : 3 (disponible : 3)
-
Relay,Power,SPDT-NO/NC,10A,5DC,250/125AC
Emplacement : Armoire A3, Tiroir "Composants Electroniques"
Référence : 8155114
Quantité : 5 (disponible : 5)
-
Surface Mount Navigation Switch
Surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down selections then select by pressing the plastic piece inwards. Capable of swtiching up to 1.2VA (360mA at 3.3V and 240mA at 5V).
Emplacement : Armoire A3, Tiroir "Composants Electroniques"
Constructeur : SparkFun
Référence : COM-08184
Plus d'infos : https://www.sparkfun.com/products/8184
Quantité : 3 (disponible : 3)