Voici le matériel de type "1.1- Cartes ARDUINO" actuellement disponible au Téléfab :
-
Arduino DUE
Emplacement : Réserve Arduino
Constructeur : Arduino
Quantité : 1 (disponible : 1)
-
Arduino ETHERNET Rev3
Emplacement : A3 Boite « Arduino - Ethernet »
Constructeur : Arduino
Quantité : 2 (disponible : 2)
-
Arduino Leonardo
Emplacement : A3
Constructeur : Arduino
Quantité : 3 (disponible : 3)
-
Arduino Méga 2560
Carte de développement Arduino basée sur un AVR plus costaud que pour la UNO
Emplacement : A3, carton réserve en haut
Constructeur : Arduino
Référence : A000067
Plus d'infos : http://arduino.cc/en
Quantité : 6 (disponible : 6)
-
Arduino MEGA ADK Rev3
Carte ARduino Mega ADK
Emplacement : Armoire A3, grand tiroir
Constructeur : Arduino
Référence : A000069
Plus d'infos : http://arduino.cc/en
Quantité : 2 (disponible : 1)
-
Arduino Mini 05
Emplacement : A3 - Boite « Arduino – Lili – Nano -Mini »
Constructeur : Arduino
Référence : A000087
Plus d'infos : http://arduino.cc/en/Main/ArduinoBoardMini
Quantité : 13 (disponible : 13)
-
Arduino nano
Emplacement : Boite « Arduino – Lili – Nano -Mini »
Constructeur : Arduino
Référence : A000005
Quantité : 10 (disponible : 9)
-
Arduino Nano 33 BLE Sense
The Nano 33 BLE Sense (without headers) is Arduino’s 3.3V AI enabled board in the smallest available form factor: 45x18mm! The Arduino Nano 33 BLE Sense is a completely new board on a well-known form factor. It comes with a series of embedded sensors: 9 axis inertial sensor: what makes this board ideal for wearable devices humidity, and temperature sensor: to get highly accurate measurements of the environmental conditions barometric sensor: you could make a simple weather station microphone: to capture and analyse sound in real time gesture, proximity, light color and light intensity sensor : estimate the room’s luminosity, but also whether someone is moving close to the board
Emplacement : A3 - Boite "communication sans fil"
Plus d'infos : https://store.arduino.cc/arduino-nano-33-ble-sense
Quantité : 1 (disponible : 1)
-
Arduino Pro
It’s blue! It’s skinny! It’s the Arduino Pro! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader in a super-sleek form factor that will fit easily into your next small project. Arduino Pro does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of this lack of connectors and USB off board. To keep things affordable and low profile, we’ve chosen to make the DC power jack footprint available, but not to populate it. We recommend running the board with a LiPo battery for better portability. Also, to keep the cost low, we made changes like using all SMD components and switching to a two layer PCB. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. In this latest version of the Arduino Pro we’ve also moved the FTDI headers back just a skoach so that the pins don’t hang over the edge of the board. We’ve also populated it with a sturdier power selection switch.
Emplacement : A3, grand tirroir
Constructeur : SparkFun
Référence : DEV-10915
Plus d'infos : https://www.sparkfun.com/products/10915
Quantité : 1 (disponible : 1)
-
Arduino PRO-MINI
Emplacement : A3 Boite « Arduino – Lili – Nano -Mini »
Constructeur : Arduino
Quantité : 2 (disponible : 2)
-
Arduino UNO
Carte Arduino UNO (ou compatible) basée sur un ATMega328P Caractéristiques principales: - version: V 3.0 - alimentation: via port USB (cordon USB inclus) ou 7 à 12 V sur connecteur alim - microprocesseur: ATMega328P - mémoire flash: 32 kB - mémoire SRAM: 2 kB - mémoire EEPROM: 1 kB - 14 broches d'E/S dont 6 PWM - 6 entrées analogiques - intensité par E/S: 40 mA - cadencement: 16 MHz - bus série, I2C et SPI - fiche USB B - dimensions: 76 x 54 x 15 mm Module prêt à l'emploi.
Emplacement : A3 - boite Arduino
Quantité : 80 (disponible : 72)
-
ARDUINO UNO SMD Rev3
Arduino UNO avec un ATMega SMD
Emplacement : A3, Boite Réserve
Constructeur : Arduino
Plus d'infos : http://arduino.cc/en
Quantité : 3 (disponible : 3)
-
Galileo Arduino
Intel® Galileo 2e génération est la première représentante d'une famille de cartes de développement certifiées Arduino*, basées sur l'architecture Intel®. Elle est spécialement conçue pour les makers, les étudiants, les formateurs et les amateurs de bricolage électronique. Elle fournit un environnement de développement matériel et logiciel totalement open source, complète et étend la gamme de produits Arduino pour offrir des fonctions de calcul plus avancées aux utilisateurs qui connaissent bien les outils de prototypage Arduino. Cette carte est compatible (au niveau du matériel, des logiciels et des broches) avec une large gamme de shields Arduino Uno* R3. Elle permet également d'intégrer des appels au firmware Linux* au croquis de programmation Arduino.
Emplacement : A3
Constructeur : Intel
Plus d'infos : http://www.intel.fr/content/www/fr/fr/do-it-yourself/galileo-maker-quark-board.html
Quantité : 2 (disponible : 2)
-
Gemma
Emplacement : A3 Boite « Arduino – Lili – Nano -Mini »
Référence : Adafruit
Quantité : 5 (disponible : 5)
-
Lilipad arduino
Emplacement : A3 Boite « Arduino – Lili – Nano -Mini »
Constructeur : Arduino
Quantité : 2 (disponible : 2)
-
Microview USB Programmer
Emplacement : A3 Tiroir « Arduino »
Plus d'infos : https://www.sparkfun.com/products/12924
Quantité : 1 (disponible : 1)
-
Seeduino Ethernet
Emplacement : A3 Boite « Arduino - Ethernet »
Quantité : 1 (disponible : 1)
-
SeedUino v4.2
Seeeduino v4.2 is an Open Source, Arduino-compatible ATmega328 MCU development board. We think Seeeduino v4.2 is one of the best Arduino derivatives/compatibles available. Seeeduino v4.2 is feature rich, much more stable, easy-to-use and even good looking. Seeeduino v4.2 is based the Arduino UNO bootloader, an ATmega16U2 as a UART-to-USB converter (basically work like an FTDI USB2UART chip). The board comes with an additional set of through-hole pads for all pins. These pads are aligned to 0.1" grid. This makes it easy to solder additional pin-headers to plug into breadboard or create your own attachment/shield with 0.1" dot-matrix general purpose PCBs. You can program the board via a micro-USB cable. Also, you can power the board via a DC Jack input (7 to 15V DC) is acceptable. There is a switch to choose the system's supply voltage either 3.3V or 5V, which is very useful if you want to set the system to 3.3V to interact with low voltage sensors. Finally, the three on-board Grove interfaces can make your board connect to Grove modules easily. Want to make something awesome, maybe just a Seeeduino v4.2 and some Groves is enough. enter image description here
Emplacement : A3 - Tiroir Arduino (et Réserve)
Constructeur : SeedStudio
Plus d'infos : http://wiki.seeedstudio.com/Seeeduino_v4.2/
Quantité : 14 (disponible : 14)
-
Seeeduino Lotus v1.1
Seeeduino Lotus is an ATMEGA328 Microcontroller development board. It is a combination of Seeeduino and Base Shield. It uses an Atmel ATMEGA328P-MU and CH340. ATMEGA328P-MU is a high performance, low power AVR 8-Bit Microcontroller. CH340 is a USB bus converter chip that can realize a USB to serial interface. Seeeduino Lotus has 14 digital input/outputs (6 of which can output PWM) and 7 analog input/outputs, a micro USB connection, an ICSP header, 12 Grove connections, a reset button.
Emplacement : A3 - Tiroir Arduino (ou Réserve)
Constructeur : SeedStudio
Plus d'infos : http://wiki.seeedstudio.com/Seeeduino_Lotus/
Quantité : 12 (disponible : 12)