Matériel

Retour aux types de matériel

Voici le matériel de type "3.4- Actionneurs DIVERS" actuellement disponible au Téléfab :

  • Buzzer electromécanique

    Buzzer mini 3-6VDB 75 DB

    Emplacement : Armoire A3, Tiroir "Composants Electroniques"

    Constructeur : RadioSpare

    Référence : 724-3175

    Datasheet : Télécharger

    Quantité : 5 (disponible : 5)

  • Buzzer Grove

    The Grove - Buzzer module has a piezo buzzer as the main component. The piezo can be connected to digital outputs, and will emit a tone when the output is HIGH. Alternatively, it can be connected to an analog pulse-width modulation output to generate various tones and effects.

    Emplacement : A3 - Servante "SON"

    Constructeur : SeedStudio

    Quantité : 2 (disponible : 2)

  • Electromagnet

    Electromagnet NON GROVE http://www.seeedstudio.com/depot/Grove-Electromagnet-p-1820.html An electromagnet is a type of magnet in which the magnetic field is produced by electric current. An electric current flowing in a wire creates a magnetic field around the wire, due to Ampere's law(see drawing below). To concentrate the magnetic field, in an electromagnet the wire is wound into a coil with many turns of wire lying side by side. The magnetic field of all the turns of wire passes through the center of the coil, creating a strong magnetic field there. Grove - Electromagnet can shuck 1KG weight and hold on. it easy to use, to learn electromagnet principle. Features Grove shape 1KG peak suction Low standby current Specification Working Voltage :DC 5V Working Current : 400mA Standby current : 200uA Load Weight: 1KG CODE: /* Turns on an Electromagnet on for one second, then off for one second, repeatedly. This example code is in the public domain. */ int Electromagnet = 0; int LED = 13; // the setup routine runs once when you press reset: void setup() { // initialize the digital pin as an output. pinMode(Electromagnet, OUTPUT); pinMode(LED, OUTPUT); } // the loop routine runs over and over again forever: void loop() { digitalWrite(Electromagnet, HIGH); // turn the Electromagnet on (HIGH is the voltage level) digitalWrite(LED, HIGH); // turn the LED on (HIGH is the voltage level) delay(1000); // wait for a second digitalWrite(Electromagnet, LOW);// turn the Electromagnet off by making the voltage LOW digitalWrite(LED, LOW); // turn the LED off by making the voltage LOW delay(1000); // wait for a second }

    Emplacement : A3 - Servante "AIMANTS"

    Constructeur : SeedStudio

    Référence : SKU: 811014001

    Quantité : 1 (disponible : 1)

  • Haut Parleur 8 Ohms Divers

    Emplacement : Armoire A3, Tiroir "Composants Electroniques"

    Constructeur : RadioSpare

    Référence : 756-4595

    Datasheet : Télécharger

    Quantité : 6 (disponible : 6)

  • Recolteur d’energie Piezo

    Emplacement : A3 Servante Recolt energie

    Quantité : 1 (disponible : 1)

  • Transducer Piezoelectrique

    Waterproof Piezoelectric Speaker

    Emplacement : Armoire A3, Tiroir "Composants Electroniques"

    Constructeur : Murata

    Référence : VSLBG1914E1400-T0

    Datasheet : Télécharger

    Quantité : 8 (disponible : 8)

Retour aux types de matériel