Voici le matériel de type "1.3- Autres Cartes/Processeurs " actuellement disponible au Téléfab :
-
Carte BeagleBoard
Emplacement : A1
Quantité : 1 (disponible : 1)
-
Carte d'extension EXPB-WP
Carte d'extension pour module WiPy 2.0, WiPy 3.0,LoPy, SiPy, FiPy et GPy permettant l'ajout d'un port USB pour l'alimentation et la programmation, d'un lecteur de micro-SD et d'un connecteur JST pour batterie LiPo non incluse.
Emplacement : A3 - boite LoPy LoRawan
Constructeur : Pycom
Référence : EXPB-WP
Plus d'infos : https://pycom.io/product/expansion-board-3-0/
Quantité : 3 (disponible : 3)
-
Carte Enocean Energy Harvest
Energy harvesting wireless switches and sensors collect and save the tiniest amounts of energy from their environment EnOcean’s energy harvesting wireless sensor technology collects energy out of air. The energy existing in our environment, for example kinetic motion, pressure, light, differences in temperature, is converted into energy for wireless communication. Combining miniaturized energy harvesters and ultra-low power wireless technology creates maintenance-free sensor solutions for the use in buildings, smart home and industrial applications as well as for the Internet of Things.
Emplacement : A3
Quantité : 1 (disponible : 1)
-
Carte FPGA Atlys Spartan-6 FPGA
The Atlys circuit board is a complete, ready-to-use digital circuit development platform based on a Xilinx® Spartan®-6 LX45 FPGA. The on-board collection of high-end peripherals, including Gbit Ethernet, HDMI Video, 128 MB DDR2 memory array, audio and USB ports make the Atlys board an ideal host for complete digital systems built around embedded processors like Xilinx's MicroBlaze™. Atlys is fully compatible with all Xilinx CAD tools, including ChipScope™, EDK, and the free WebPACK™, so designs can be completed with no extra costs.
Emplacement : A1
Constructeur : Digilent
Référence : 410-178
Datasheet : Télécharger
Plus d'infos : https://store.digilentinc.com/atlys-spartan-6-fpga-trainer-board-limited-time-see-nexys-video/
Quantité : 1 (disponible : 1)
-
Carte FPGA NetFPGA-SUME Virtex-7
The NetFPGA-SUME board is the ideal platform for high-performance and high-density networking design. A collaborative effort between Digilent, the University of Cambridge, and Stanford University, the NetFPGA-SUME has everything you need to conduct cutting edge research and development of state-of-the-art networking systems. The NetFPGA-SUME is an amazingly advanced board that features one of the largest and most complex FPGAs ever produced, a Xilinx® Virtex®-7 690T supporting thirty 13.1 GHz GTH transceivers. Four SFP+ 10Gb/s ports, five independent high-speed memory banks built from both 500MHzQDRII+ & 1866MT/s DDR3 SoDIMM devices, and an eight-lane third generation PCIe offer incredible throughput and can sustain a large number of high-speed data streams to the FPGA fabric and memory devices. Other features include the presentation of twenty transceivers in total on FMC and QTH expansion connectors, and SATA ports. The NetFPGA-SUME's main mission is to give students, researchers, and developers a state-of-the-art platform for networking, whether it's learning the fundamentals or creating new hardware and software applications. This board easily supports simultaneous wire-speed processing on the four 10Gb/s Ethernet ports, and it can manipulate and process data on-board, or stream it over the 8x Gen.3 PCIe interface and the expansion interfaces.
Emplacement : A1
Constructeur : Digilent
Référence : 410-301
Datasheet : Télécharger
Plus d'infos : https://store.digilentinc.com/netfpga-sume-virtex-7-fpga-development-board/
Quantité : 1 (disponible : 1)
-
Carte NVIDIA Jetson Nano
Carte NVIDIA Jetson Nano Avec une impressionnante architecture graphique, un processeur puissant et une multitude de connexions matérielles (audio, vidéo, ethernet, etc.), le kit de développement NVIDIA Jetson Nano place entre les mains des chercheurs, étudiants et bricoleurs d'élite une solution de développement IA à la fois abordable et riche de possibilités.
Emplacement : A2 - Kit Jetbot
Plus d'infos : https://www.generationrobots.com/fr/403351-kit-de-developpement-nvidia-jetson-nano.html
Quantité : 2 (disponible : 2)
-
FPGA : XILINX SPARTAN-3 Starter Board
The Spartan®-3E Starter Board provides a powerful and highly advanced self-contained development platform for designs targeting the Spartan-3E FPGA from Xilinx®. It features a 500K gate Spartan-3E FPGA with a 32-bit RISC processor and DDR interfaces. The board also features a Xilinx Platform Flash, USB, and JTAG parallel programming interfaces with numerous FPGA configuration options via the onboard Intel® StrataFlash and STMicroelectronics® Serial Flash. The board is fully compatible with all versions of the Xilinx ISE® tools, including the free WebPACK™. The board ships with a power supply and USB cable for programming so designs can be implemented immediately with no hidden costs. The Spartan-3E Starter board is also compatible with the MicroBlaze™ Embedded Development Kit (EDK) and PicoBlaze™ from Xilinx.
Emplacement : A1
Quantité : 2 (disponible : 2)
-
LoPy 4.0
Le LoPy 4 est une carte de développement miniature dédiée aux objets connectés, basée sur le langage Python 3, de faible consommation et disposant de connectivité WiFi, Bluetooth (compatible BLE), LoRa et Sigfox. Attention: L'utilisation des réseaux LoRa et Sigfox sans antenne peut causer des dommages à la carte LoPy 4.0. C'est pourquoi il est recommandé d'utiliser une antenne. Le prêt de la carte LoPy inclus: - Kit antenne pour LoRa et Sigfox ( cette antenne ne convient que pour une utilisation dans les bandes LoRa 868 MHz / 915 MHz, et n'est pas compatible avec les bandes 433 MHz). - La carte d'extension pour permettre l'ajout d'un port USB
Emplacement : A3 - boite LoPy LoRawan
Constructeur : Pycom
Référence : 4.0
Plus d'infos : https://pycom.io/product/lopy4/
Quantité : 3 (disponible : 2)
-
M5 Stack Development Kit
Kit de développement M5 Stack ESP32
Emplacement : A3 - Boite M5 Stack
Référence : M5 Stack Development Kit
Plus d'infos : https://shop.m5stack.com/products/basic-core-iot-development-kit
Quantité : 1 (disponible : 1)
-
Micro:bit + cable USB/microUSB
Le micro:bit: carte dotée d'un processeur ARM. La platine de 4 × 5 cm embarque un processeur ARM Cortex-M0, un capteur de mouvement 3D (ou accéléromètre) et un magnétomètre 3D (ou boussole numérique), des connectiques Bluetooth et USB, une matrice de 5 x 5 DEL (25 diodes électroluminescentes), un bouton de réinitialisation et deux boutons programmables3. Le petit circuit imprimé peut être alimenté par un connecteur USB sur le port micro-USB ou par deux piles AAA (3V) en série sur un autre connecteur. La carte se branche à l'aide de cinq anneaux et 20 broches de connexion4. Size: approx. 5cm x 4cm Weight: 8g Microprocessor: 32-bit ARM® Cortex™ M0 CPU A 5x5 LED matrix with 25 red LEDs to light up. Each LED is individually programmable and can display animated patterns, scrolling text and alphanumeric characters Two programmable buttons. The micro:bit can detect either of its two buttons being pressed and unpressed, and can be programmed to act on that or send the information to another device. Use them as a games controller, or control music on a smartphone. On-board motion detector or 3-AXIS digital accelerometer that can detect movement and tell other devices you’re on the go. It measures on 3 axes, X, Y, Z, and sends back the data in milli-gs. The micro:bit can react to this data and tell other devices it is moving. The device will also detect a small number of standard actions, eg shake, tilt and freefall. Turn the micro:bit into a spirit level. Use it for motion-activated games. Have your micro:bit light up when something is moved. A built-in compass, 3D magnetometer to sense which direction you’re facing and your movement in degrees. This data can be used by the micro:bit in a program or be sent to another device. The magnetometer could also detect the presence of certain metals and magnets. Bluetooth® Smart Technology (previously called Bluetooth Low Energy) to wirelessly communicate with other Bluetooth Smart devices and exchange data and commands. Connect the micro:bit to other micro:bits, devices, phones, tablets, cameras and everyday objects all around. Play games, share creations or join forces to create multi-micro:bit masterpieces. Take a selfie. Pause a DVD or control your playlist. Five Ring Input and Output (I/O) including power (PWR) and ground (GRD). PWR, GRD, I/O x 3. Each I/O ring is programmable to be either analogue or digital. The rings are suitable for crocodile clips or 4mm banana plugs, meaning an external sensor can be connected to measure things like temperature, moisture, proximity to other devices. The micro:bit reads values from the sensor and acts on them or sends them to another device. The micro:bit can also send control commands to the rings – these could be used to control things like a motor or robot. The PWR and GRD rings supply 3 volts and could be used to power a separate device. Edge Connector: 20 pins, 1.27mm pitch and extend 7.62mm from board edge suitable for standard connectors. This allows the micro:bit to be connected to another device, eg Arduino, Galileo, Kano and Raspberry Pi through a standard connector. Micro-USB contoller: This is controlled by a separate processor and presents the micro:bit to a computer as a memory stick. This means the program can be dragged onto the micro:bit in the same way a file is dragged onto a memory stick. 2xAAA battery pack System LED x 1 (yellow) System push button switch x 1
Emplacement : A2 - Carton Micro:bit
Constructeur : BBC
Plus d'infos : https://tech.microbit.org/
Quantité : 10 (disponible : 10)
-
Micro:bit MI:power board Alimentation+Buzzer
Cette petite platine est spécialement conçue pour se fixer à l'arrière d'une carte micro:bit (non livrée) afin de pouvoir lui adjoindre une solution d'alimentation ainsi qu'un buzzer additionnel. La platine intègre un mini interrupteur ainsi qu'un support pour recevoir une pile CR2032. La pile est livrée avec la platine. Un jeu de vis vous permettra de fixer la platine à l'arrière de votre carte micro:bit. Attention: AVEC 3 VIS+ 3 ECROUs + 3 SPACERS 1 x MI:power board for the BBC micro:bit. 3 x Counter Sunk M3 x12mm Machine Screws. 3 x M3 Hex Full Width Nuts. 3 x Plastic Spacers. 1 x CR2032 3V Coin Cell.
Emplacement : A2 - Carton Micro:bit
Constructeur : BBC
Plus d'infos : https://www.kitronik.co.uk/5610-mipower-board-for-the-bbc-microbit.html
Quantité : 10 (disponible : 10)
-
Microbit V2
La carte micro:bit V2 est un nano-ordinateur créé pour la promotion de la programmation dans l'éducation. Elle est très simple d'utilisation, mais peut également s'intégrer dans des applications complexes.
Emplacement : A2 - Carton Microbit
Référence : Carte micro:bit V2
Plus d'infos : https://microbit.org/get-started/first-steps/set-up/
Quantité : 2 (disponible : 2)
-
Processeur ATMega 328
Microcontrôleur - bootloader UNO
Emplacement : Armoire A3, tiroir circuits intégrés + tiroir composants
Constructeur : Arduino
Référence : A000048
Quantité : 14 (disponible : 14)
-
Raspberry Pi
Mini ordinateur sur une carte.
Emplacement : Armoire A2
Plus d'infos : http://www.raspberrypi.org/
Quantité : 2 (disponible : 2)
-
Raspberry Pi 3 B
Emplacement : A2
Référence : Model B
Quantité : 3 (disponible : 3)
-
Raspberry Pi 3 B+
Fourni avec carte SD + Alimentation
Emplacement : A2 - carton Raspberry
Référence : Model B+
Quantité : 13 (disponible : 11)
-
Raspberry Pi 4 (KIT)
Raspberry Pi 4 Model B - 2Gb RAM --> Inclus: Carte Raspberry Pi 4 2Gb USB Chargeur Pi4 Case MicroUSB 16Go + adapteur Cable ethernet et HDMI
Emplacement : A2 - carton Raspberry
Quantité : 1 (disponible : 1)
-
Raspberry Pi Pico
La Raspberry Pi Pico est une carte programmable miniature, rapide et polyvalente, construite autour d'un RP2040.
Emplacement : A2 - Carton Raspberry
Référence : Raspberry Pi Pico
Datasheet : Télécharger
Plus d'infos : https://www.gotronic.fr/art-carte-raspberry-pi-pico-33027.htm#complte_desc
Quantité : 10 (disponible : 10)
-
Raspberry Pi Zero WH
Le Raspberry Pi Zero WH est une version miniature de la carte Raspberry Pi classique. Ce modèle WH est basé sur un processeur ARM à 1 GHz accompagné de 512 Mo de RAM. Il intègre un port GPIO déjà soudé à la carte mère et dispose d'interfaces WiFi et Bluetooth.
Emplacement : A2 - carton Raspberry
Plus d'infos : https://www.raspberrypi.org/products/raspberry-pi-zero-w/?resellerType=home
Quantité : 2 (disponible : 1)
-
Shield GROVE pour Raspberry Pi
Ce module Grove Base HAT de Seeedstudio est une carte d'interface permettant de raccorder facilement, rapidement et sans soudure les capteurs et modules Grove de Seeedstudio sur une carte Raspberry Pi 3B+ ou 4B (non incluses).
Emplacement : A2 - carton Raspberry
Constructeur : SeedStudio
Plus d'infos : https://www.gotronic.fr/art-module-grove-base-hat-103030275-28937.htm
Quantité : 1 (disponible : 1)
-
SmartRF05 Evaluation Board
Emplacement : A3
Quantité : 2 (disponible : 2)